Fireplace Firebox Burner Bio Ethanol Insert Biofuels - "Victory" Big"

Description

Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser.
Postal Service as always works - Great!
Combustion chamber "Victory" Big"
The combustion chamber "Victory" Big"
is intended for use as a separate unit or for bio fireplaces.
You are buying only a Stainless Steel Ethanol Fireplace Insert. Photo ”with a burning fire in the fireplace” shows one possible application The combustion chamber "Victory" Big".
Especially:
• Divider fire - a special chamber design allows the fire to burn uniformly throughout its length.
• Cover allows to adjust the height of the fire.
• Material - Stainless steel -
2,0 mm
or 5,66 points
thick.
• Total -
2,3 liters
of biofuel.
• Maximum filling of fuel is recommended for no more than - 1900 ml.
• Biofuel consumption of 450 ml / hour - at the maximum level of fire.
• Environmentally Friendly
• As Safe as a Candle
• No Smell or Fumes
• Minimal Installation
No Venting, Gas or Electrical Lines needed
• Just install, fill with ethanol and light it up, and there you go a wonderful fire.
• Used:
Biofuels, bioethanol, ethanol
Dimensions:
• Tank (Length x Height x Width):
56 cm
x
4,7 cm
x
8,5 cm
or 22
,44 inch
х
1,85 inch
х
3,35 inch
• The tank lid (Length x Width):
60 cm
x 11,5 cm or
23,63 inch
x 4,53 inch
The device
for
ignition
of fire
A device for
ignition
and
flame control
in
Biofireplaces
.
Made of
stainless
steel
.
Length
22
cm
or 8
,67 inch
Application
:
1
.
Pour
into a container
for
bio-fuel
combustion
2
.
Lower the
tip of
the device
for the ignition
and
wet
in the
tank
for
combustion
3
.
Set fire to
the tip of
the device
for
combustion
4
.
Set fire to
the tip of
the device
for
burning
tank
with
biofuel
Information that tells you about me as a manufacturer of burners
This letter is from a buyer who bought Combustion chamber "Victory" Medium ", left to me positive feedback and just wrote me a letter. Thank you, I was very pleased.
Sent Date: 17-Aug-12 04:51:43 AEST
Dear allmechanicalparts,
Howdy! Thanks for the feedback. FYI, I did a burn test the other night in our fireplace with it. I only put in 1L of Denatured Alcohol into the reservoir to check how the denatured alcohol would burn in it (flame height and color) and for how long. I was very pleasantly surprised to get 2hrs. & 20 min. from it. This means a 1.3L fill as indicated by your directions of maximum fill will get right around a 3-hr. burn, that's a very efficient design you have, that is awesome! Love the unit very much.
The green label one produces a nice golden flame, the blue label does not, the blue container only produces a blue flame which isn't as natural and attractive. Being that this product is at any local hardware store, these fireplaces will really start to take off! :)
Now I can build my tabletop fireplace now that I have the key element. Thanks much!
Gary
Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser.